{"id":37332,"date":"2026-07-10T10:40:52","date_gmt":"2026-07-10T07:40:52","guid":{"rendered":"https:\/\/wecare-eg.net\/?p=37332"},"modified":"2026-09-17T12:50:13","modified_gmt":"2026-09-17T09:50:13","slug":"thermometer-error-codes-lo-hi-err","status":"publish","type":"post","link":"https:\/\/wecare-eg.net\/en\/thermometer-error-codes-lo-hi-err\/","title":{"rendered":"Thermometer Error Codes: LO, HI, ERR, E1 and E2 Explained"},"content":{"rendered":"<section dir=\"ltr\" lang=\"en\">\n<div class=\"wecare-answer\"><strong>Direct answer:<\/strong> thermometer error codes are not standardized across every model. <strong>LO<\/strong> can mean the detected value is below the measuring range or that the sensor has not captured body temperature correctly; <strong>HI<\/strong> can indicate a value above the supported range; and <strong>ERR<\/strong> usually means the measurement cycle could not be completed. Always start with the exact model and its manual, then check measurement mode, placement, battery and operating environment.<\/div>\n<h2><span class=\"ez-toc-section\" id=\"Before_Interpreting_Any_Thermometer_Error_Code\"><\/span>Before Interpreting Any Thermometer Error Code<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Write down these details first:<\/p>\n<ul>\n<li>The thermometer model and product number.<\/li>\n<li>The code exactly as shown on the screen.<\/li>\n<li>Whether it appeared at startup or during measurement.<\/li>\n<li>Whether the device was in Body or Surface mode, when applicable.<\/li>\n<li>The measurement site, distance or probe placement.<\/li>\n<li>Battery condition and room temperature.<\/li>\n<\/ul>\n<p>The same code can mean different things on different models. These details help prevent random troubleshooting and, importantly, prevent a device message from being mistaken for a medical diagnosis.<\/p><div id=\"ez-toc-container\" class=\"ez-toc-v2_0_88 counter-hierarchy ez-toc-counter-rtl ez-toc-grey ez-toc-container-direction\">\n<div class=\"ez-toc-title-container\">\n<p class=\"ez-toc-title\" style=\"cursor:inherit\">\u0633\u0646\u062a\u062d\u062f\u062b \u0641\u0649 \u0647\u0630\u0627 \u0627\u0644\u0645\u0642\u0627\u0644 \u0639\u0646!<\/p>\n<span class=\"ez-toc-title-toggle\"><a href=\"#\" class=\"ez-toc-pull-right ez-toc-btn ez-toc-btn-xs ez-toc-btn-default ez-toc-toggle\" aria-label=\"Toggle Table of Content\"><span class=\"ez-toc-js-icon-con\"><span class=\"\"><span class=\"eztoc-hide\" style=\"display:none;\">Toggle<\/span><span class=\"ez-toc-icon-toggle-span\"><svg style=\"fill: #0d944a;color:#0d944a\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" class=\"list-377408\" width=\"20px\" height=\"20px\" viewBox=\"0 0 24 24\" fill=\"none\"><path d=\"M6 6H4v2h2V6zm14 0H8v2h12V6zM4 11h2v2H4v-2zm16 0H8v2h12v-2zM4 16h2v2H4v-2zm16 0H8v2h12v-2z\" fill=\"currentColor\"><\/path><\/svg><svg style=\"fill: #0d944a;color:#0d944a\" class=\"arrow-unsorted-368013\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" width=\"10px\" height=\"10px\" viewBox=\"0 0 24 24\" version=\"1.2\" baseProfile=\"tiny\"><path d=\"M18.2 9.3l-6.2-6.3-6.2 6.3c-.2.2-.3.4-.3.7s.1.5.3.7c.2.2.4.3.7.3h11c.3 0 .5-.1.7-.3.2-.2.3-.5.3-.7s-.1-.5-.3-.7zM5.8 14.7l6.2 6.3 6.2-6.3c.2-.2.3-.5.3-.7s-.1-.5-.3-.7c-.2-.2-.4-.3-.7-.3h-11c-.3 0-.5.1-.7.3-.2.2-.3.5-.3.7s.1.5.3.7z\"\/><\/svg><\/span><\/span><\/span><\/a><\/span><\/div>\n<nav><ul class='ez-toc-list ez-toc-list-level-1 ' ><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-1\" href=\"#\" data-href=\"https:\/\/wecare-eg.net\/en\/thermometer-error-codes-lo-hi-err\/#Before_Interpreting_Any_Thermometer_Error_Code\" >Before Interpreting Any Thermometer Error Code<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-2\" href=\"#\" data-href=\"https:\/\/wecare-eg.net\/en\/thermometer-error-codes-lo-hi-err\/#Common_Thermometer_Error_Codes\" >Common Thermometer Error Codes<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-3\" href=\"#\" data-href=\"https:\/\/wecare-eg.net\/en\/thermometer-error-codes-lo-hi-err\/#Why_Does_LO_Appear_When_the_Thermometer_Starts\" >Why Does LO Appear When the Thermometer Starts?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-4\" href=\"#\" data-href=\"https:\/\/wecare-eg.net\/en\/thermometer-error-codes-lo-hi-err\/#LO_on_a_Non-Contact_Forehead_Thermometer\" >LO on a Non-Contact Forehead Thermometer<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-5\" href=\"#\" data-href=\"https:\/\/wecare-eg.net\/en\/thermometer-error-codes-lo-hi-err\/#When_Could_a_Low_Temperature_Reading_Be_Real\" >When Could a Low Temperature Reading Be Real?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-6\" href=\"#\" data-href=\"https:\/\/wecare-eg.net\/en\/thermometer-error-codes-lo-hi-err\/#Why_Does_HI_Appear\" >Why Does HI Appear?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-7\" href=\"#\" data-href=\"https:\/\/wecare-eg.net\/en\/thermometer-error-codes-lo-hi-err\/#How_to_Fix_ERR_Step_by_Step\" >How to Fix ERR Step by Step<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-8\" href=\"#\" data-href=\"https:\/\/wecare-eg.net\/en\/thermometer-error-codes-lo-hi-err\/#E1_E2_and_E3_Why_There_Is_No_Universal_Meaning\" >E1, E2 and E3: Why There Is No Universal Meaning<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-9\" href=\"#\" data-href=\"https:\/\/wecare-eg.net\/en\/thermometer-error-codes-lo-hi-err\/#Battery_Symbol_and_a_Dim_Display\" >Battery Symbol and a Dim Display<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-10\" href=\"#\" data-href=\"https:\/\/wecare-eg.net\/en\/thermometer-error-codes-lo-hi-err\/#The_Thermometer_Works_but_the_Numbers_Keep_Changing\" >The Thermometer Works, but the Numbers Keep Changing<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-11\" href=\"#\" data-href=\"https:\/\/wecare-eg.net\/en\/thermometer-error-codes-lo-hi-err\/#When_Does_the_Thermometer_Need_Technical_Support\" >When Does the Thermometer Need Technical Support?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-12\" href=\"#\" data-href=\"https:\/\/wecare-eg.net\/en\/thermometer-error-codes-lo-hi-err\/#When_the_Person_Matters_More_Than_the_Device\" >When the Person Matters More Than the Device<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-13\" href=\"#\" data-href=\"https:\/\/wecare-eg.net\/en\/thermometer-error-codes-lo-hi-err\/#Frequently_Asked_Questions\" >Frequently Asked Questions<\/a><ul class='ez-toc-list-level-3' ><li class='ez-toc-heading-level-3'><a class=\"ez-toc-link ez-toc-heading-14\" href=\"#\" data-href=\"https:\/\/wecare-eg.net\/en\/thermometer-error-codes-lo-hi-err\/#What_does_LO_mean_on_a_digital_thermometer\" >What does LO mean on a digital thermometer?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-3'><a class=\"ez-toc-link ez-toc-heading-15\" href=\"#\" data-href=\"https:\/\/wecare-eg.net\/en\/thermometer-error-codes-lo-hi-err\/#Does_LO_mean_my_body_temperature_is_dangerously_low\" >Does LO mean my body temperature is dangerously low?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-3'><a class=\"ez-toc-link ez-toc-heading-16\" href=\"#\" data-href=\"https:\/\/wecare-eg.net\/en\/thermometer-error-codes-lo-hi-err\/#What_does_HI_mean_on_a_thermometer\" >What does HI mean on a thermometer?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-3'><a class=\"ez-toc-link ez-toc-heading-17\" href=\"#\" data-href=\"https:\/\/wecare-eg.net\/en\/thermometer-error-codes-lo-hi-err\/#How_do_I_clear_ERR\" >How do I clear ERR?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-3'><a class=\"ez-toc-link ez-toc-heading-18\" href=\"#\" data-href=\"https:\/\/wecare-eg.net\/en\/thermometer-error-codes-lo-hi-err\/#Are_E1_and_E2_the_same_on_every_thermometer\" >Are E1 and E2 the same on every thermometer?<\/a><\/li><\/ul><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-19\" href=\"#\" data-href=\"https:\/\/wecare-eg.net\/en\/thermometer-error-codes-lo-hi-err\/#Reference_for_Error_Codes\" >Reference for Error Codes<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-20\" href=\"#\" data-href=\"https:\/\/wecare-eg.net\/en\/thermometer-error-codes-lo-hi-err\/#Compare_Thermometers_for_Home_Use\" >Compare Thermometers for Home Use<\/a><\/li><\/ul><\/nav><\/div>\n\n<h2><span class=\"ez-toc-section\" id=\"Common_Thermometer_Error_Codes\"><\/span>Common Thermometer Error Codes<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<table>\n<tbody>\n<tr>\n<th>Code<\/th>\n<th>Possible meaning<\/th>\n<th>First step<\/th>\n<\/tr>\n<tr>\n<td>LO \/ Low<\/td>\n<td>Below the measuring range or body temperature was not captured correctly<\/td>\n<td>Check Body mode, placement, contact or measuring distance<\/td>\n<\/tr>\n<tr>\n<td>HI \/ High<\/td>\n<td>Above the measuring range or sensor exposed to a heat source<\/td>\n<td>Move away from the heat source and allow the device to stabilize<\/td>\n<\/tr>\n<tr>\n<td>ERR \/ Error<\/td>\n<td>Incomplete measurement cycle or unsuitable operating condition<\/td>\n<td>Restart and repeat the measurement according to the manual<\/td>\n<\/tr>\n<tr>\n<td>E1 \/ E2 \/ E3<\/td>\n<td>Model-specific error code<\/td>\n<td>Use the troubleshooting table in the exact product manual<\/td>\n<\/tr>\n<tr>\n<td>Battery symbol<\/td>\n<td>Battery is low or needs replacement<\/td>\n<td>Use the specified battery type and correct polarity<\/td>\n<\/tr>\n<tr>\n<td>Blank display<\/td>\n<td>Dead battery, poor contact or a device fault<\/td>\n<td>Check the battery and battery compartment<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2><span class=\"ez-toc-section\" id=\"Why_Does_LO_Appear_When_the_Thermometer_Starts\"><\/span>Why Does LO Appear When the Thermometer Starts?<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>On some contact thermometers, LO can appear before the probe is placed because the sensor is detecting a temperature below the device&#8217;s body-temperature measuring range. If the message disappears and a completed reading appears after correct placement and the completion beep, this may be normal behavior for that model.<\/p>\n<p>It becomes a troubleshooting issue when LO continues during a properly performed measurement or appears instead of a result every time. Then check probe position, skin contact, whether you waited for the completion signal, and battery condition.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"LO_on_a_Non-Contact_Forehead_Thermometer\"><\/span>LO on a Non-Contact Forehead Thermometer<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>LO can appear when the device is in Body mode but is aimed too far away, the measuring distance is incorrect, the forehead is unusually cold after coming indoors, or the sensor is not aimed at the intended area. Do not simply move the device closer at random; use the distance specified in the manual and any positioning guide built into the model.<\/p>\n<p>Also check that you did not use Surface mode and then interpret the result as body temperature. Body and object\/surface modes can use different ranges and calibration logic.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"When_Could_a_Low_Temperature_Reading_Be_Real\"><\/span>When Could a Low Temperature Reading Be Real?<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>A completed low numerical reading is different from seeing the LO code. If a low number repeats with correct technique and the person has symptoms such as confusion, marked drowsiness, severe shivering or significant cold exposure, seek medical assessment. Do not use the LO message alone to conclude that a person has hypothermia.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"Why_Does_HI_Appear\"><\/span>Why Does HI Appear?<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<ul>\n<li>The detected value is above the model&#8217;s measuring range.<\/li>\n<li>Body mode was used on a hot surface.<\/li>\n<li>The thermometer was stored near a heat source or used outside its specified operating environment.<\/li>\n<li>The sensor is dirty or has been exposed to a sudden temperature change.<\/li>\n<li>A genuinely high body-temperature reading may need confirmation and medical interpretation depending on symptoms and age.<\/li>\n<\/ul>\n<p>Move the thermometer away from external heat, allow it to acclimatize to the room, clean the sensor only as instructed by the manufacturer, and repeat the measurement correctly. If the device produces a completed high numerical reading and the person has concerning symptoms, focus on the person&#8217;s condition rather than endlessly testing the device.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"How_to_Fix_ERR_Step_by_Step\"><\/span>How to Fix ERR Step by Step<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<ol>\n<li><strong>Turn the device off:<\/strong> wait briefly, then restart it.<\/li>\n<li><strong>Check the mode:<\/strong> use Body for body temperature and Surface\/Object mode only for supported non-body measurements.<\/li>\n<li><strong>Repeat the correct technique:<\/strong> keep a contact probe in place until the completion signal, or use the correct distance and angle for a non-contact model.<\/li>\n<li><strong>Clean the sensor:<\/strong> only with a method permitted by the manufacturer, then let it dry completely.<\/li>\n<li><strong>Check the battery:<\/strong> replace a low battery with the specified type.<\/li>\n<li><strong>Check the environment:<\/strong> operate the thermometer within its specified temperature and humidity range.<\/li>\n<li><strong>Record the error:<\/strong> if it repeats, photograph the screen and note exactly when it occurs.<\/li>\n<\/ol>\n<h2><span class=\"ez-toc-section\" id=\"E1_E2_and_E3_Why_There_Is_No_Universal_Meaning\"><\/span>E1, E2 and E3: Why There Is No Universal Meaning<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>E1, E2, E3 and similar codes are not universal standards. E1 on one thermometer can mean something completely different from E1 on another. Searching the code without the model number can therefore lead to incorrect instructions.<\/p>\n<p>Use the <strong>Troubleshooting<\/strong>, <strong>Error Messages<\/strong> or equivalent section of the exact model manual. For Medisana devices, you can search the official <a href=\"https:\/\/www.medisana.com\/en\/Docs\/\" target=\"_blank\" rel=\"noopener nofollow\">Medisana document library<\/a> using the product or model number.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"Battery_Symbol_and_a_Dim_Display\"><\/span>Battery Symbol and a Dim Display<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>A weak battery may cause a dim display, shutdowns or failure to begin a measurement. Use the battery type specified in the manual; a battery that physically fits is not necessarily electrically correct. Insert it with the correct polarity.<\/p>\n<p>If a battery has leaked, avoid direct contact with the leaked material and stop using the thermometer until it has been inspected or safely replaced.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"The_Thermometer_Works_but_the_Numbers_Keep_Changing\"><\/span>The Thermometer Works, but the Numbers Keep Changing<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Changing numerical readings are not necessarily an error-code problem. Variations can result from changing the measurement site, time, distance, technique or device. Repeat measurements using the same site and method, and follow the user manual rather than repeatedly restarting the thermometer.<\/p>\n<p>For a correct contact-temperature technique, see our guide on <a href=\"https:\/\/wecare-eg.net\/en\/how-to-measure-temperature-under-the-armpit\/\">how to measure temperature under the armpit<\/a>.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"When_Does_the_Thermometer_Need_Technical_Support\"><\/span>When Does the Thermometer Need Technical Support?<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<ul>\n<li>ERR continues after a fresh battery and correct technique.<\/li>\n<li>The lens, probe or display is physically damaged.<\/li>\n<li>Liquid has entered the battery compartment.<\/li>\n<li>A code appears that is not documented in the user manual.<\/li>\n<li>The device repeatedly shuts down or becomes abnormally hot.<\/li>\n<\/ul>\n<p>Do not open the device if doing so would violate its warranty or safety instructions. When contacting support, provide the model number, a photo of the code, battery type and the conditions in which the error appears.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"When_the_Person_Matters_More_Than_the_Device\"><\/span>When the Person Matters More Than the Device<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>If the person has breathing difficulty, altered consciousness, a seizure, a concerning rash, neck stiffness or obvious deterioration, seek medical help and do not let thermometer troubleshooting delay care. Use another suitable thermometer if one is available, but do not postpone assessment while trying to clear an error code.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"Frequently_Asked_Questions\"><\/span>Frequently Asked Questions<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<h3><span class=\"ez-toc-section\" id=\"What_does_LO_mean_on_a_digital_thermometer\"><\/span>What does LO mean on a digital thermometer?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>It often means the detected value is below that model&#8217;s measuring range or that body temperature was not captured correctly. On some contact thermometers it can appear normally before the probe reaches body temperature. The exact meaning must be confirmed in the model manual.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Does_LO_mean_my_body_temperature_is_dangerously_low\"><\/span>Does LO mean my body temperature is dangerously low?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Not by itself. LO is a device message, not a diagnosis. A completed low numerical reading taken correctly, especially with symptoms, should be interpreted separately and may need medical assessment.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"What_does_HI_mean_on_a_thermometer\"><\/span>What does HI mean on a thermometer?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>HI commonly indicates that the detected value is above the supported range for the current mode, but external heat, incorrect mode or operating conditions can also trigger it. Check the manual for the exact model.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"How_do_I_clear_ERR\"><\/span>How do I clear ERR?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Restart the thermometer, verify the measurement mode and technique, check and replace the battery if needed, confirm the operating environment and inspect the sensor. If ERR persists despite correct use, consult the model manual or technical support.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Are_E1_and_E2_the_same_on_every_thermometer\"><\/span>Are E1 and E2 the same on every thermometer?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>No. E1, E2 and similar codes are model-specific. Always interpret them using the exact device manual.<\/p>\n<section class=\"wecare-evidence-source\" data-eeat-source=\"thermometer-error-codes\">\n<h2><span class=\"ez-toc-section\" id=\"Reference_for_Error_Codes\"><\/span>Reference for Error Codes<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>The final authority for an error code is the manual for the exact thermometer model. Medisana manuals and product documents can be searched in the <a href=\"https:\/\/www.medisana.com\/en\/Docs\/\" target=\"_blank\" rel=\"noopener nofollow\">official Medisana document library<\/a>.<\/p>\n<p><small>A thermometer is a measuring tool and does not diagnose the cause of fever, low temperature or other symptoms.<\/small><\/p>\n<\/section>\n<section class=\"wecare-commerce-next-step\">\n<h2><span class=\"ez-toc-section\" id=\"Compare_Thermometers_for_Home_Use\"><\/span>Compare Thermometers for Home Use<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>If you need a replacement or a different measurement method, compare the <a href=\"https:\/\/wecare-eg.net\/en\/product-category\/temperature-measuring-devices\/\">temperature-measuring devices available from WeCare Egypt<\/a> by measurement method and intended use.<\/p>\n<\/section>\n<\/section>\n<\/p>","protected":false},"excerpt":{"rendered":"<p>Understand LO, HI, ERR, E1, E2 and battery symbols on digital thermometers, what they may mean, and the correct troubleshooting order before requesting support.<\/p>\n","protected":false},"author":3,"featured_media":37334,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_jetpack_feature_clip_id":0,"_jetpack_memberships_contains_paid_content":false,"footnotes":""},"categories":[210],"tags":[],"class_list":["post-37332","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-health-and-prevention"],"jetpack_sharing_enabled":true,"jetpack_featured_media_url":"https:\/\/wecare-eg.net\/wp-content\/uploads\/2026\/09\/chatwp-import-46pW577w.jpg","_links":{"self":[{"href":"https:\/\/wecare-eg.net\/en\/wp-json\/wp\/v2\/posts\/37332","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/wecare-eg.net\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/wecare-eg.net\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/wecare-eg.net\/en\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/wecare-eg.net\/en\/wp-json\/wp\/v2\/comments?post=37332"}],"version-history":[{"count":1,"href":"https:\/\/wecare-eg.net\/en\/wp-json\/wp\/v2\/posts\/37332\/revisions"}],"predecessor-version":[{"id":37333,"href":"https:\/\/wecare-eg.net\/en\/wp-json\/wp\/v2\/posts\/37332\/revisions\/37333"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/wecare-eg.net\/en\/wp-json\/wp\/v2\/media\/37334"}],"wp:attachment":[{"href":"https:\/\/wecare-eg.net\/en\/wp-json\/wp\/v2\/media?parent=37332"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/wecare-eg.net\/en\/wp-json\/wp\/v2\/categories?post=37332"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/wecare-eg.net\/en\/wp-json\/wp\/v2\/tags?post=37332"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}